Magnetic 70 Candles: How to Get an Even Burn Every Time

Quick answer

To get an even burn from your Magnetic 70 candle, always trim the wick to about 1/4 inch before each lighting, let the wax melt to the edge of the vessel on the first burn (about 2–3 hours), and never burn it for more than 4 hours at a time. If tunneling starts, gently push the softened edge wax inward with a heatproof tool after extinguishing. Consistent wick care is the single most effective habit for a long-lasting candle burn.

Why Magnetic 70 Candles Tunnel—and How to Stop It

Tunneling happens when the wax melts only around the wick, leaving a ring of hard wax on the sides. This is usually caused by a wick that’s too long (creating a small flame that can’t heat the full surface) or by extinguishing the candle too soon. The first burn is critical: if you don’t let the melt pool reach the edge, the candle ‘remembers’ that smaller diameter and will keep tunneling. To fix a tunnel, you can gently push the softened edge wax toward the center after blowing out the flame, using a heatproof tool like a butter knife or a wick dipper. Never use water to extinguish a candle—it can crack the vessel and splatter hot wax.

Wick Trimming: The 1/4-Inch Rule That Changes Everything

A wick that’s too long causes a large, flickering flame that smokes and burns unevenly. A wick that’s too short won’t produce enough heat to melt the wax evenly. The sweet spot is about 1/4 inch (6 mm) before every single burn. Use a wick trimmer, nail clippers, or sharp scissors. Trim when the candle is cool and the wax is solid—trimming a hot wick can drop debris into the melt pool. Also, remove any wick trimmings or matches from the wax; they can clog the wick and cause a weak flame. If you notice soot on the inside of the vessel, your wick is likely too long.

Burn Time: The 4-Hour Rule for a Long-Lasting Candle

Vyrao candles are designed for a clean, even burn, but burning for too long can overheat the wax and cause the wick to mushroom. Keep each session to 2–4 hours. After 4 hours, extinguish the flame, let the candle cool completely (at least 2 hours), trim the wick, and relight if desired. This cycle prevents the melt pool from getting too deep and helps the candle burn down evenly. If you want a stronger scent throw, burn in a draft-free room; drafts cause the flame to dance and burn unevenly.

Vessel Care: Porcelain and Recycled Packaging

The Wonder Large candle comes in a white porcelain ceramic vessel, and Vyrao packaging is made from 100% recycled and recyclable materials. Porcelain holds heat well, so the vessel may stay warm for a while after extinguishing. Always place the candle on a heat-resistant surface, away from drafts and flammable objects. Once the candle is finished, you can clean the porcelain vessel with warm soapy water and reuse it for small items. Never use a sharp object to scrape out leftover wax—it can scratch the porcelain.

Step-by-step: even burn routine

1. Trim the wick to 1/4 inch: Use a wick trimmer or scissors to cut the wick to about 1/4 inch before every burn. Do this when the candle is cool and the wax is solid. Checkpoint: The wick should stand straight and be free of any mushrooming or debris.
2. First burn: melt to the edge: On the first burn, let the wax melt all the way to the edge of the vessel—usually 2–3 hours for a large candle. This sets the memory of the candle and prevents tunneling. Checkpoint: The melt pool should be a full circle, not a smaller ring around the wick.
3. Limit each burn to 4 hours: Never burn for more than 4 hours at a time. Extinguish, let cool for at least 2 hours, trim the wick, and relight if needed. Checkpoint: If the vessel feels too hot to touch, you’ve burned too long—extinguish and let it cool.
4. Fix a tunnel early: If you see a tunnel forming, gently push the softened edge wax inward with a heatproof tool after extinguishing. Do this while the wax is still warm but not liquid. Checkpoint: The next burn should have a wider melt pool; repeat if necessary.
5. Keep the wax clean: Remove any wick trimmings, matches, or dust from the melt pool before lighting. Debris can clog the wick and cause an uneven burn. Checkpoint: The flame should be steady and bright, not flickering or smoking.

Product facts

• Wonder Large: Wonder Large candle’s pale yellow wax is a blend of mineral, coconut, and rapeseed wax; the coconut wax comes from smallholder farmers in the Philippines, and the rapeseed and mineral waxes are sustainably sourced in Europe. This wax blend is designed to burn cleanly and evenly when the wick is properly trimmed and burn times are controlled.
• Magnetic 70: Every 50ml bottle of Vyrao fragrance contains a supercharged Herkimer diamond crystal energised by healer Louise Mita. If you enjoy the Magnetic 70 scent in candle form, you can layer it with the fragrance for a consistent scent experience.